Precautions for using agricultural PVC layflat hose

1. Cleaning: After the hose is used up, it should be cleaned. For some hoses that transport foam, it must be thoroughly scrubbed to protect the glue layer. In order to remove the grease on the hose, you can wash it with warm water. For the frozen hose, first melt it, and then clean and dry it. The hose that has not been dried should not be rewound and stored.
2. Laying: When laying the hose, avoid sharp objects and various oils. When laying the hose vertically to a high place, use the hose hook. When laying the hose through the main road, the hose should be protected. When the bridge passes the railway, the water belt should pass over the track to prevent the water belt from being crushed by the wheels and supply water continuously.
3. Connection: When the hose is put on the hose interface, it must be covered with a layer of soft protective material, and then fastened with galvanized iron wire or hose hoop.
4. Application: When using the hose, the low-pressure resistant hose should be connected to a place close to the water pump. The hose after filling with water should be prevented from changing or bending, and the hose interface should also be prevented from being damaged by collision. And what needs to be paid attention to is the hot summer season. When the water supply needs to be suspended on the fire site, in order to prevent the hose from freezing, the water pump needs to work at a slow speed to keep a small water output.